Online Auction
Industrial Machinery
Auction
Harrison Township facilities closing. Bid on quality plastic equipment. Bidding is already underway, browse the lots below, take a closer look, and leave us a message with your bid.
Browse LotsWomen Owned · Two Michigan Locations
How It Works
Bidding Made Simple
01
Browse
Browse the auction items listed below to see what is currently available.
02
Select
Select an item to take a closer look at photos, specs, and condition notes.
03
Bid
Visit the item page and leave us a message letting us know your bid and any questions you may have.
04
Wait
Wait for bidding to close on November 1st, we will follow up with winning bidders directly.
Current Lots
Inventory Up for Bid
Bidding is open now through November 1st. Select an item below, then leave us a message on its page with your bid and any questions.
Year: 1989
Usage: Used, sold in its current condition and was in working order at time of removal.
Description: Van Dorn model 120RS-8F-VV-HT with 17" x 17" tie bar spacing, 25" x 25" platen, 30" daylight, 14" clamp stroke, and mold thickness capacity from 6" to 16". Retrofitted with a Sigmatek controller, core pull, hydraulic knockout, and PPE loader with magnet drawer. Serial number 201.
Year: 1997
Usage: Used, reliable performance for continued production without investing in a new unit.
Description: Van Dorn model 170RS-14F, 170-ton clamp force, 20" x 20" tie bar spacing, 30.5" x 32" platen, 35" daylight, mold thickness range 6" to 18". Equipped with Pathfinder 2500 controller, core pull, hydraulic K.O., robot interface, and AEC loader with magnet drawer. Serial number 1033.
Year: 1991
Usage: Used, a reliable choice for precision plastic molding projects.
Description: Van Dorn model 170RS-8F-HT, 170-ton clamping force, 20" x 20" tie bar spacing, 30.5" x 32" platen, 35" daylight, 17" clamp stroke, mold thickness 6" to 18". Equipped with an updated Sigmatek controller, core pull, hydraulic K.O., robot interface, and PPE loader with magnet drawer. Serial number 363.
Year: 1993
Usage: Used, suited for operations requiring repeatability and tight tolerances.
Description: Van Dorn model 170RS-HT-8F, 170-ton clamping force, 20" x 20" tie bar spacing, 30.5" x 30" platen, 35" daylight, 17" clamp stroke, mold thickness 6" to 16". Equipped with Sigmatek controller, core pull, hydraulic K.O., robot interface, and PPE loader with magnet drawer. Serial number 480.
Year: 1991
Usage: Used, dependable for large scale production operations.
Description: Van Dorn model 300RS-20F-HT, 20 oz. shot size, 25" x 25" tie bar spacing, 37" x 37" platen, 49" daylight, 24" clamp stroke, mold thickness 8" to 25". Upgraded with Sigmatek controller, core pull, hydraulic K.O., PPE loader with magnet drawer, and a Sepro S25 robot complete with teach pendant and additional riser. Serial number 2242.
Year: 2021
Usage: Used, built for plastic molding production operations.
Description: Horizontal injection molding machine with 39.75 oz. shot capacity, 32.28" x 32.28" tie bar spacing, 46.06" x 46.06" platen, 56.69" daylight, 28.74" clamp stroke, mold height 12.6" to 27.95". Equipped with a Haitian controller, core pull, hydraulic knockout, and PPE loader with magnet drawer.
Year: 1989
Usage: Used, robust equipment designed for demanding production environments.
Description: Van Dorn model 500HT-PS-60F, 500-ton clamping force, 32.5" x 32.5" tie bar spacing, 47.8" x 47.8" platen, 59" daylight, 30" clamp stroke, mold thickness 10" to 29". Equipped with updated Sigmatek controller, core pull, hydraulic K.O., and PPE loader with magnet drawer.
Year: 2019
Usage: Used, efficient and robust, designed for precision and reliability in plastic molding processes. Four units available.
Description: Toshiba all electric machine, 1 oz. shot size, 16.10" x 14.20" tie bar spacing, 26" x 24" platen, 26.4" daylight, 11.8" clamp stroke, mold thickness 5.9" to 14.5". Equipped with Injectvisor V70 controller, 25 lb. hopper with magnet drawer, and AST Technology picker. Serial number 114G013G19.
Year: 1995
Usage: Used, maintains reliable operational status despite previous ownership.
Description: Cincinnati horizontal injection molding machine, 13 oz. shot size, 17.9" x 16.7" tie bar spacing, 26.8" x 25.6" platen, 35.8" daylight, mold thickness 5.9" to 15". Equipped with Camac VSX controller, core pull, hydraulic knockout, and AEC/Whitlock dryer with hopper and loader mounted directly on the machine. Serial number T36A0395030.
Year: 1999
Usage: Used, valuable for enhancing production capabilities while keeping costs low.
Description: Engel 100 ton, two shot horizontal injection mold machine with rotary table, 2.5 oz. shot size. Dual shot capability enables two material or two color output with seamless transitions between materials, reducing downtime. Equipped with CC90 controller, hydraulic knockout, air blow system, and a secondary injection unit on the side opposite the operator.
Year: 2019
Usage: Used, maintained and in good working condition, suited for small to medium production runs.
Description: Toshiba all electric horizontal injection mold machine, 1 oz. shot size, 16.10" x 14.20" tie bar spacing, 26" x 24" platen, 26.4" daylight, 11.8" clamp stroke, mold thickness 5.9" to 14.5". Equipped with Injectvisor V70 controller, Win Systems loader with magnet drawer, and picker with teach pendant. Serial number 114G015J19.
Year: Not specified in the listing.
Usage: Used, remains in good working condition.
Description: Mokon model DT-2309-oo temperature controller with an intuitive interface and robust design suited to industrial environments. 9 kW heater, 3/4 HP process power, 250°F maximum temperature, 230/3/60 electrical with 23.3 FLA. Serial number 61511.
Year: 2019
Usage: Used, dependable and energy efficient for precision molding runs.
Description: Toshiba all electric injection molding machine with 55 ton clamp force, 1 oz. shot size, and an Injectvisor V70 controller. The all electric drive supports consistent, energy efficient operation and repeatable results on complex mold designs. Serial number 114G014J19.
Year: 2004
Usage: Used, suited for manufacturing or general facility temperature control.
Description: Advantage model 1K 2A CF 41HFX air cooled chiller rated for 2 tons of cooling, built for commercial and industrial temperature control with simple, easy to maintain controls. Runs on 460/3/60 electrical power and uses R22 refrigerant. Serial number 87476.
Year: Not specified in the listing.
Usage: Used, sturdy auxiliary drying setup ready to move into an existing line.
Description: Motan Luxor 80 Flexside dryer rated at 80 lbs per hour with 50 CFM airflow and a 40 degree below zero dewpoint. Includes three 50 lb hoppers and two Budget Loaders, all mounted on a mobile cart for easy repositioning. Serial number 10304 0000 1.
Year: 1999
Usage: Used, a lower cost alternative to new equipment for high volume drying.
Description: Thoreson McCosh TD40R dryer rated at 40 lbs per hour with a 1 HP motor and 460/3/60 electrical service. Paired with a 240 lb insulated hopper on a stand that helps hold steady temperatures and reduce heat loss. Serial number 99 254 10.
Year: Not specified in the listing.
Usage: Used, ready to add insulated material storage to an existing drying system.
Description: Whitlock insulated hopper with a 300 lb capacity mounted on a stand. Detailed specifications were not listed by the seller, so interested bidders should contact us with any questions.
Year: Not specified in the listing.
Usage: Used, mobile insulated hopper setup with magnet drawer for added material protection.
Description: Whitlock insulated hopper with a 300 lb capacity and a magnet drawer, mounted on a cart for easy movement around the shop floor. Detailed specifications were not listed by the seller, so interested bidders should contact us with any questions.
Year: 2020
Usage: Used, still runs efficiently and is well suited to beside the press granulation.
Description: Matsui SMGL 3 61 2/3U slow speed granulator with a 1 HP motor, 30 RPM cutting speed, and 22 lbs per hour throughput through a 261mm x 262mm opening. The slow cutting action reduces dust and noise while keeping particle size consistent. Serial number 72 001402 00339.
Year: Not specified in the listing.
Usage: Used, a cost effective granulator suited to small to medium operations.
Description: Nelmor 810MI granulator with an 8" x 10" opening, a 5 HP motor, and 230 or 460 volt, 3 phase, 60 Hz electrical service. The unit offers a compact footprint and simple maintenance to limit downtime.
Year: 2000
Usage: Used, checked against operating standards and ready for continued service.
Description: Advantage temperature controller with a 10 kW heater, 250 degree Fahrenheit standard maximum temperature, and 230 volt, 3 phase power drawing 26.7 FLA. Serial number 70549.
Year: 2018
Usage: Used, dependable controller suited for integration into an existing system.
Description: Advantage temperature controller with a 10 kW heater and a 3/4 HP process motor. The seller did not list a maximum temperature or complete electrical rating. Serial number 160195.
Year: 2019
Usage: Used, cost effective alternative to new equipment for steady process temperatures.
Description: Advantage model SK1035T temperature controller with a 10 kW heater, a 3/4 HP pump rated at 35 GPM and 30 PSI, a 250 degree Fahrenheit maximum temperature, and 230 volt, 3 phase, 60 Hz power drawing 26.7 FLA. Serial number 160196.
Year: 2019
Usage: Used, suited for processes that need steady, accurate temperature regulation.
Description: Advantage model SK1035T temperature controller with a 10 kW heater, a 3/4 HP process motor, 35 GPM pump flow at 30 PSI, and 230 volt, 3 phase, 60 Hz power drawing 26.7 FLA. Serial number 160193.
Year: Not specified in the listing.
Usage: Used, compact cutting chamber suited to operations with limited space.
Description: Nelmor granulator with a 10" x 10" opening, a 5 HP motor, and 230 or 460 volt, 3 phase, 60 Hz electrical service, with front and top loading for flexible material handling.
Year: 2003
Usage: Used, dependable equipment for accurate temperature control across varied settings.
Description: Advantage model SK1035ZLE 21C temperature controller with a 10 kW heater and a 3/4 HP process motor on 230 volt, 3 phase, 60 Hz power drawing 26.7 FLA. Serial number 82137.
Year: 2003
Usage: Used, well maintained unit ready for a cost conscious buyer.
Description: Advantage model SK 1035ZLE 2101 temperature controller with a 10 kW heater and a 3/4 HP process motor on 230 volt, 3 phase, 60 Hz power drawing 26.7 FLA. Serial number 62138.
Year: 2000
Usage: Used, affordable functionality without sacrificing performance.
Description: Advantage model SK1035 21C1 temperature controller with a 10 kW heater and a 3/4 HP process pump on 230 volt, 3 phase, 60 Hz power. Serial number 70550.
Year: Not specified in the listing.
Usage: Used, suited to general manufacturing needs where steady temperature matters.
Description: Conair temperature controller built for steady thermal regulation on 230 volt, 3 phase, 60 Hz power. The seller did not list a kW rating or maximum temperature. Serial number 293802.
Year: Not specified in the listing.
Usage: Used, note that the specifications list one zone as missing, please inquire for details.
Description: Incoe hot runner system with 8 temperature zones and 15 amp controllers, mounted with power and thermocouple cables on a cart. Holds temperature steadily across zones to support consistent part quality. Please note the specifications list one zone as missing, contact us with any questions.
Year: Not specified in the listing.
Usage: Used, reliable multi zone controller suited to complex molding operations.
Description: Orycon model DC900 24D hot runner controller with 24 independently controlled temperature zones, J and K type thermocouple inputs, selectable Fahrenheit or Celsius readout, current sensing, and DME style connectors. Serial numbers 01198F09 and 001956F06.
Year: Not specified in the listing.
Usage: Used, proven field reliability for auxiliary chiller operations.
Description: Thermal Care model PT600 15 15 pump tank with 600 gallon capacity, two 15 HP Baldor process pumps, one 5 HP Baldor recirculating pump, and 460 volt, 3 phase, 60 Hz electrical service rated at 56 FLA. Serial number TK86930.
Year: 1994
Usage: Used, has already proven itself in demanding industrial granulating applications.
Description: Rapid model 611SR granulator with a 3 HP motor, an 11" x 16.5" opening, and a 190 RPM solid three blade staggered rotor. Compact footprint and low maintenance design help it fit into an existing production line. Serial number 240 280.
Year: 2003
Usage: Used, verified good condition and ready for steady thermal control.
Description: Advantage model SK1035ZLE 21D temperature controller with a 10 kW heater, a 3/4 HP process motor, 35 GPM pump flow, and 230 volt, 3 phase, 60 Hz power drawing 26.7 FLA. Serial number 82138.
Year: 2021
Usage: Used, in good condition and suited to inventory and quality control work.
Description: Zenith model Standard US ST01 part counter scale with a 66 lb capacity, 0.4 lb minimum weight, 0.002 lb divisions, and a 6 volt DC power supply. Clear digital display and quick setup support accurate counting for inventory or inspection work. Serial number 20101039.
Year: 2007
Usage: Used, well maintained and ready to support a medium sized operation.
Description: Motan Luxor 120 dryer rated at 120 lbs per hour with 80 CFM airflow and a 1.5 kW heater, running on 480 volt, 3 phase power. Paired with a 250 lb insulated hopper on a cart for easy repositioning. Serial number 1X864 0000 1 R900 7964.
Troy MI Facility
Also Available in Troy
The lots below are located at our Troy, MI showroom rather than the Harrison Township facility. Select an item for full details, then leave us a message with your bid.
Year: 1990
Usage: Used, taken out of service and running parts, located at our Troy, MI facility.
Description: Cincinnati Milacron model VT110 5, 110 ton injection molding machine with a 5 oz. shot size and 24.8" x 22.8" platens. Equipped with a Camac VEL control. The machine was taken out of service while running parts. Located at our Troy, MI facility.
Year: 2013
Usage: Used, approximately 22000 hours of recorded operation, located at our Troy, MI facility.
Description: Borche model BS150 III, 165 ton injection molding machine with an 11.3 oz. shot size and a KEBA 2580 controller. Runs on 380 volt power with a transformer for 240 to 480 volt, 3 phase, 60 Hz service and meets CE standards. Includes two core pulls, four air blows, an SPI robot interface, SPI platens, centralized grease lubrication, a nozzle purge guard, a three color alarm, leveling pads, and water manifolds. Approximately 22000 hours of operation. Serial number 1203K112. Located at our Troy, MI facility.
Year: 2013
Usage: Used, approximately 19500 hours of recorded operation, located at our Troy, MI facility.
Description: Borche model BS200 III, 220 ton injection molding machine with a 16 oz. shot size and a KEBA 2580 controller. Runs on 380 volt power with a transformer for 240 to 480 volt, 3 phase, 60 Hz service and meets CE standards. Includes two core pulls, four air blows, an SPI robot interface, SPI platens, centralized grease lubrication, a nozzle purge guard, a three color alarm, leveling pads, and water manifolds. Approximately 19500 hours of operation. Serial number 1204L032. Located at our Troy, MI facility.
Frequently Asked Questions
Auction and Company Questions
Browse the inventory above, select an item to view its full description, then visit the item page and leave us a message with your bid and any questions.
No. There is no registration required to browse or bid on any item in this auction.
Bidding is open now and closes on November 15. We will follow up directly with winning bidders after the close.
We will contact you directly to arrange payment along with pickup at either Michigan location or freight shipping nationwide.
We were founded in 1978 and have grown from a single room office into a trusted name in the plastics and metalworking machinery industry.
We operate two Michigan facilities, a 26,000 square foot showroom and warehouse in Troy and a 20,000 plus square foot heated storage facility in Shelby Township.
Yes. Nationwide Machinery Sales is proudly women owned.
No. Alongside our own stock we maintain a worldwide dealer network, giving customers access to thousands of additional machines when we do not have what they need on our floor.