Category
Subcategory
Table Size
Tonnage
Diameter
Number of Zones
Horsepower
Ponds Per Hour
KW
Pounds
Travels
275 Ton Milacron Roboshot Injection Mold Machine
- Fancu Controller Hours - approx. 37,259 Shot Size: 14.6 oz. | Tie Bar Spacing: 27.9" x 25" | Platen Size: ...
Haas Mini Mill Vertical CNC Machining Center
Table size: 12" x 36" 7.5 HP - 6,000 RPM Rapid - X-Y-Z: 600 IPM Spindle nose to table: 14" Table ...
Haas VM-6 CNC Vertical Machining Center
Table size: 64" L x 28" D Motor: 30 HP Max. table load: 4,000 lbs. Distance spindle nose to table...
308 Ton Toshiba Injection Mold Machine
Injectvisor V10 Control Hydraulic clamp Shot Size: 41 oz. | Tie Bar Spacing: 28.7" x 28.7" | Platen Size: 40...
Taylor Hobson Talyrond 365XL Fully Automated Roundness Measuring Tester
Used to measure large diameter components KEY FEATURES: - Fully automated centre and level capabi...
Harig 612 Surface Grinder
Motor: 1 HP, 3450/2850 RPM Electrics: 460/3/60 EQUIPPED WITH: - 612 Electro-Magnetic Chuck - Work...
Matsui SMGL2-200U Slow Speed Granulator
Opening: 11" x 12" | Motor HP: 2 HP, 1.5 kw, 29 RPM | Voltage: 230/3/60
3.5" Davis Standard Extruder 30:1 L/D
- 7 Zone Electrically heated, water cooled (closed loop) and side vented barrel - 52" Centerline ...
3.5" NRM/Davis Standard Extruder 24:1
- Water cooled, 7 Zone vented & plugged barrel - Approx. 100-150 HP DC Motor - Belt driven 15.12:...
3/4" Berlyn Extruder L/D 10:1
Air cooled Diameter: 0.75 | L/D Ratio: 10:1 | Screw Diameter: 3/4" | Barrel Zones: 4 | Voltage: 230 volt
130 Ton Autojector Rotary Mold Machine
EQUIPPED WITH: - 2 Sta. Rotary Table - Allen Bradley Panel View Plus 700 Controller - Light Curta...
150 Ton Toyo Rotary Molding Machine
Shot Size: 6.69 oz. | Tonnage: 150 | Platen Size: 22" x 22" | Stroke: 12" | Mold Size: 11.61"/20.08" | Tabl...
80 Ton Newbury Shuttle Injection Mold Machine Model Ve-80RS
- Mold height: 8" min. - Pathfinder 3000 Control - Extra screw and barrel Less than 5,000 hours Shot Size: 2...
125 Ton Newbury Shuttle Molding Machine
EQUIPPED WITH: - Pathfinder 3000 Control - Die height adjustment Shot Size: 15 oz. | Tonnage: 125 | Platen S...
30 Ton Van Dorn/Newbury Vert. Mold Mach
EQUIPPED WITH: - Pathfinder 3000 Control - Bimetallic barrel - Robot interface - Mineral filled h...
70 Ton Engel Rotary Injection Mold Machine
2-Station rotary table Voltage: 480/3/60 Hours - 26,155 Currently under power. Shot Size: 25mm (1.4 - 1.8 oz...
80 Ton Newbury Rotary Molding Machine
EQUIPPED WITH: - Maco 4000 Control Shot Size: 3 oz. | Tonnage: 80 | Platen Size: 12" x 14" | Stroke: 6.4"
30 Ton Atlas C-Frame Shuttle Mach. NEW!
Model PMG-30HCS (horizontal injection) **NEW** INJECTION UNIT: - Shot size: 4.9 oz. - Nitride bar...
AEC 7.5 HP Vacuum Pump
7.5 HP 460 volt w/Vac-Trac Conveying System - VT 8 Zone Control Panel Model VTC08L1A S/N 00E0129 Horsepower:...
Conair 5 HP Vacuum Pump w/dust coll.
Type: Positive displacement 5 HP 460 volt Controls included Horsepower: 5
AEC 7.5 HP Vacuum Pump
7.5 HP 460 volt w/Vac Trac 8 Zone Control Model VTC08L1A S/N 00E0127 Horsepower: 7,5
6" Gloucester Water Ring Pelletizer Line
6" Gloucester Extruder - Model 266-001 - 30:1 L/D - Air cooled with Contracool & glower - Jackete...
SHJ 30mm Twin Screw Pelletizing Line NEW
- Screw speed: 60-600 RPM - 8 Barrels - length barrel 1: 120mm length barrels 2-8: 180mm - Barrel...
PPE 12 Zone Hot Runner
- 12 Zone of QTC-15 Controllers - 4 Wire - Power Cable - No Thermocouple Cable - Powertran 15 KVA...
Orycon 48 Zone Hot Runner
48 Zone Hot Runner - W12-20P Power Cable - 12 zone, 20' - W12-20T Thermocouple Cable - 12 zone, 2...
Orycon T-500 24 Zone Hot Runner NEW!!!
SYSTEM CONSISTS OF: - Control Cabinet with Touch Screen - 4 each) 6 Zone Control Cards - 2) W12-1...
Orycon 24 Zone Hot Runner Controller - NEW!!!
- J/K Type T/C - Farenht/Celsius - Current sensing - DME Style connectors SYSTEM CONSISTS OF: - 2...
Orycon T-500 24 Zone Hot Runner Controller - NEW!!!
- DME Style connectors - Control cabinet with touch screen - 4 each - 6 zone control cards - 2) W...
Orycon 12 Zone Hot Runner - NEW
12 Zone Hot Runner Controller J/K Type T/C Farenht/Celsius DME Style Connectors Current Sensing S...
Orycon 12 Zone Hot Runner - NEW!!!
12 Zone Hot Runner Controller J/K Type T/C Farenht/Celsius Current Sensing DME Style Connectors S...
Orycon 4 Zone Hot Runner - NEW
Orycon 4 Zone Hot Runner Controller - J/K Type T/C - Farenht/Celsius - Current Sensing - w/6 Sing...
DME 2 Zone Hot Runner
- 1 Zone) IMS 15 AMP Controller - 1 Zone) ITC 15 AMP Controller No cables Number of Zones: 2
DME 2 Zone Hot Runner
15 AMP Controllers No power & thermocouple cables Photos available. Number of Zones: 2
DME 2 Zone Hot Runner
15 AMP Controllers No power & thermocouple cables Photos available. Number of Zones: 2
Erico/EMI 8 Sta. Voltage Controller
3 AMP, 8 Staation Control system Control up to 720 watts per zone 220 volt Mounted on stand Number of Zones: 8
1150 Ton Hyundai Electric Injection Mold Machine
- 2 x 480 volt Auxiliary power plugs, 20 AMPS eacg - Bi-Metallic screw & barrel (anti-wear) - Dua...
3630 Ton Borche Injection Mold Mach. NEW
EQUIPPED WITH: - CE Standard/UL Certified Parts - KEBA 2880 Control - 480/3/60 - 5 x Core Pull - ...
3000 Ton Cincinnati Injection Mold Machine
- Xtreem NT Control - Maagnetic Platens Press available Fall 2025. Sold "As Is - Where Is" no war...
3000 Ton Cincinnati Injection Mold Machine
- Camac 486 Control - Magnetic Platens - Includes Sepro 7X-100XL Robot Press available Fall 2025....
3000 Ton Cincinnati Injection Mold Machine
- Mosaic Gen II Control - Includes 3) Fanuc Robots - Magnetic Platens - Rebuilt pancake - New scr...
715 Ton Borche Injection Mold Mach. NEW
EQUIPPED WITH: - CE Standard - KEBA 2580 Control - 480/3/60 - 2 x Core Pull - 4 x Air Blow - SPI ...
2420 Ton Borche 2-Platen Mold Mach. NEW
EQUIPPED WITH: - CE Standard - KEBA 2580 Controller - 480/3/60 - 2 x Core Pull - 4 x Air Blow - S...
1650 Ton Borch 2 Platen Mold Machine
EQUIPPED WITH: - Swivel Injection Unit - CE Standard/UL Certified Parts - KEBA 2880 Controller - ...
730 Ton Van Dorn Caliber Molding Machine
EQUIPPED WITH: - 4) Core Pull - Magnetic clamp plate Photos available. Shot Size: 80 oz. | Tonnage: 730
1200 Ton Borche Injection Mold Machine
- CE Standard - KEBA 2580 Controller - 480/3/60 - 2 X Core Pull - 4 X Air Blow - SPI Robot Interf...
1000 Ton Borche 2-Platen Inj. Mold Mach.
- CE Standard - KEBA 2580 Controller - 480/3/60 - 2 X Core Pull - 4 X Air Blow - SPI Robot Interf...
496 Ton Woojin Injection Mold Machine
EQUIPPED WITH: - KEBA Control - Core Pull - 460 volt Shot Size: 52.28 oz. | Tonnage: 496 | Tie Bar Spacing: ...
880 Ton Borche 2-Platen Mold Machine NEW
EQUIPPED WITH: - Swivel injection unit - CE Standard/UL Certified Parts - KEBA 2880 Controller - ...
600 Ton Husky Hy Electric Injection Mold Machine
EQUIPPED WITH: - Polaris Controls - Accumulators - Moving & stationary platens: 4 Air, 1 Hydrauli...
496 Ton Woojin Injection Mold Machine
EQUIPPED WITH: - KEBA Control - Core Pull - 460 volt Shot Size: 52.28 oz. | Tonnage: 496 | Tie Bar Spacing: ...
660 Ton Borche 2-Platen Mold Machine
EQUIPPED WITH: - CE Standard - KEBA 2580 Controller - 380 volt w/transformer to required voltage ...
550 Ton Borche 2-Platen Mold Machine NEW
EQUIPPED WITH: - CE Standard - KEBA 2580 Controller - 480 Volt - 2 x Core Pull - 4 x Air Blow - S...
427 Ton Engel 2-Shot All Electric Injection Mold Machine
Piggyback type secondary barrel Locating ring spacing: 400mm (15.74") Used in medical clean room ...
500 Ton Borche Injection Mold Machine
EQUIPPED WITH: - KEBA 2980 Control - Eject on the fly - Swivel injection unit - 480/3/60 - 90A - ...
495 Ton HPM GP-Plus Injection Mold Mach.
EQUIPPED WITH: - Barber Coleman 4000 Eurotherm Controller - 10 Stage Injection Control - Automati...
390 Ton Toshiba Injection Mold Machine
Photos available. Shot Size: 41 oz. | Tonnage: 390 | Tie Bar Spacing: 28.7" x 28.7" | Platen Size: 40.1" x 4...
400 Ton Battenfeld 2-Shot Injection Mold Machine
Controller: Main dialog Second injection uit is at 90 degrees from the top Rotary platen Yushin Y...
400 Ton Cincinnati Injection Mold Mach.
EQUIPPED WITH: - Camac VEL Control Photos available. Shot Size: 29 oz. | Tonnage: 400 | Tie Bar Spacing: 29....
250 Ton Arburg Allrounder All Electric Injection Mold Machine Multi-Component
- Selogica Control - 2nd injection unit - (630 A 2500-400) 2.11 oz. - Servo hydraulic pump for ej...
220 Ton Borche Injection Mold Machine
- KEBA 2580 Control - CE Standard - 380 volt w/transformer for 240-480/3/60 - 2 x Core Pull - 4 x...
400 Ton Cincinnati Injection Mold Mach.
EQUIPPED WITH: - Camac VLC Control Photos available. Shot Size: 41 oz. | Tonnage: 400 | Tie Bar Spacing: 29....
400 Ton Borche Injection Mold Machine
EQUIPPED WITH: - KEBA 2980 Control - Eject on the fly - Swivel injection unit - 480/3/60 - 90A - ...
300 Ton Engel 2-Shot Injection Mold Machine
Hydraulic drive 2nd injection unit at 90 degrees on non-operator side Includes robot. Used in med...
320 Ton Borche Injection Mold Machine
EQUIPPED WITH: - KEBA 2980 Control - Eject on the fly - Swivel injection unit - 480/3/60 - 90A - ...
165 Ton Borche Injection Mold Machine
- KEBA 2580 Controller - 380 volt w/transformer for 240-480/3/60 - CE Standard - 2 x Core Pull - ...
150 Ton Van Dorn Injection Mold Machine
Shot Size: 8 oz. | Tonnage: 150 | Tie Bar Spacing: 17" x 14.8" | Platen Size: 26" x 24.5" | Daylight: 27"
190 Ton HPM GP-Plus Injection Mold Mach.
EQUIPPED WITH: - Barber Coleman 4000 Eurotherm Controller - 10-Stage Injection Control - Automati...
260 Ton Borche Injection Mold Machine
EQUIPPED WITH: - KEBA 2980 Control - Eject on the fly - Swivel injection unit - 480/3/60 - 90A - ...
200 Ton Borche Injection Mold Machine
EQUIPPED WITH: - KEBA 2980 Control - Eject on the fly - Swivel injection unit - 480/3/60 - 90A - ...
110 Ton Cincinnati Injection Mold Machine
- Camac VEL Control Shot Size: 5 oz. | Tonnage: 110 | Tie Bar Spacing: 16.1" x 14.2" | Platen Size: 24.8" x ...
160 Ton Borche Injection Mold Machine
EQUIPPED WITH: - KEBA 2980 Control - Eject on the fly - Swivel injection unit - 480/3/60 - 90A - ...
88 Ton Nissei All Electric Injection Mold Machine
- TACT Controller - 230/3/60 Very low hours - only 12,933 approx. Came out of a Medical Molding F...
130 Ton Borche Injection Mold Machine
EQUIPPED WITH: - KEBA 2980 Controller - Eject on the fly - Swivel injection unit - 480/3/60 - 90A...
66 Ton Toshiba Electric Injection Mold Machine
EQUIPPED WITH: - Injectvisor V21 Enhanced Touch Screen Control Shot Size: 3.4 oz. | Tonnage: 66 | Tie Bar Sp...
90 Ton Boy Injection Mold Machine
EQUIPPED WITH: - Procan Alpha 2 Control - Patented pressure intensifier with integrated valve fun...
35 Ton Engel All Electric Injection Mold Machine
EQUIPPED WITH: - CC300 Controller - Hydraulic K.O. - Robot Interface - Corepull - Valve Gate Inst...
90 Ton Borche Injection Mold Machine
EQUIPPED WITH: - KEBA 2980 Control - Eject on the fly - Swivel injection unit - 480/3/60 - 90A - ...
55 Ton Toyo Electric Inj. Mold Machine
EQUIPPED WITH: - All electric machine - Double Toggle clamp system Photos available. Shot Size: 3.01 oz.
55 Ton Toyo Electric Inj. Mold Machine
EQUIPPED WITH: - All electric machine - Double toggle clamping system Photos available Shot Size: 2 oz.
Simards TW588 40 Ton Die Cutting Press
Model TW-588 - 25.5" x 25.5" Head - 25.5" x 64" Cutting area - Traveling head Photos available. Tonnage: 40
Microcut Vertical Mill
Model V-1-1/2 Table size: 9" x 49" Speeds - Low: 60 - 500 RPM High: 500 - 4200 RPM Motor: 3 HP El...
50 Ton Macrodyne 4-Post Hydraulic Press
Daylight opening: 36" Pressing force: 50 ton Maximum return force: 1.5 ton Usable bed size: 72" L...
Carolina H-Frame Hydraulic Press
Model CPB-1200 Capacity: 50 ton Distance between housings: 26" Cylinder diameter: 1.75" Stroke: a...
Chevalier 10" x 20" Surface Grinder
Wheel Guard Dresser Automatic Downfeed Coolant Wheel Balancing Device Table Size: 1020 | Max. Grinding Lengt...
Deltech Refridgerated Air Dryer
Model 425 Capacity: 425 SCFM Max. inlet air pressure: 10/175 PSIG Max. inlet air temperature: 40/...
Thunderbolt 5 HP Air Compressor
- 5 HP, 3450 RPM - 230/1/60, 16 AMPS - Max. ambient - 40 degrees C Horsepower: 5
Fadal VMC3020VHT Vertical Machining Center
- Spindle nose to table: 4" - 28" - Distance spindle center to column ways: 28.875" - Motor drive...
Kitamura CNC Machining Center - Mycenter 4xiF
- Spindle motor: 25 HP - Flood coolant through spindle - Dual chip auger & chip conveyor - Renish...
Deckel Maho HSC105 Linear Vertical Machining Center
Table size: 47" x 33" T-Slotted Renishaw Probe Spindle speeds: 28,000 RPM Chip conveyor Travels: 4232 | Trav...
Hurco VMX42 Vertical Machining Center
Rapid rate - X Axis: 1,378 IPM Y Axis: 1,378 IPM Z Axis: 1,378 IPM Max. table load: 3,000 lbs. Sp...
AEC Whitlock OS-014-2 Blender
Blending capacity: Up to 700 lbs/hr 1/6 HP Motor 115/1/60 Pounds per Hour: 700
Conair TB900 4 Component Blender
- Controls: TrueBlend Touch Screen Control - 115 volt - Blend accuracy to 1/2% - batch size 9000 ...
Shini STM-910W Temp. Controller NEW
Delivery: Test & ship - 2 weeks ARO KW: 9 | No. of Zones: 1 | Media: Water | Pump HP: 1 | Voltage: 230-460/3...
Orycon 12 Zone Valve Gate Controller - NEW!!!
- Graphic Touch Screen - 12' Communication Cable - 8' Power Cord - Position & Time Reference - 5 ...
BIG 12 Zone Valve Gate Controller - NEW
Delivery: 4-5 weeks ARO Terms: 35% down, 35% due at delivery, balance due within established terms. Number o...
Orycon 8 Zone Pneumatic Valve Gate Controller - NEW!!!
- Graphic Touch Screen - Position & time reference - 8 Zone Pneumatic valve pack - Mounted in bas...
Orycon 8 Zone Valve Gate Controller - NEW!!!
- Graphic Touch Screen - 12' Communication Cable - 8' Power Cord - Position & Time Reference - 5 ...
Orycon 6 Zone Valve Gate Controller NEW
- Graphic Touch Screen - 12' Communication Cable - 5 Gallon Pressure Tank - Oil Cooler - Accumula...
10 Zone Valve Gate Controller
Allen Bradley SLC 500 Data Table Access Module Cat #1747-DTAM Series D Air valves and gauges on e...
BIG 4 Zone Valve Gate Controller NEW
TERMS: 35% down at time of approval, 35% due at time of delivery and balance due within set terms...
Orycon 4 Zone Valve Gate Controller NEW
Model T-700-04-BB 4 Zone Sequencer System - Valve Gate Controller - Graphic Touch Screen - 12' Co...
MGM 300 KVA TRANSFORMER
TYPE HT V CENTRAL TAP INSUL. SYS. 220 DEGREES C 150 DEGREES RISE COOLING CLASS "AA" DRY TYPE TRAN...
Rex Mfg. 112.5 KVA Transformer
KVA: 112.5 | KW: 112,5 | PHASE: 3/60 | LOW VOLTAGE: 240 Y | HIGH VOLTAGE: 480 Y
Square D 45 KVA Transformer
Came off a Hot Runner KVA: 45 | KW: 45 | PHASE: 3/60 | LOW VOLTAGE: 120/208 - 125 AMPS | HIGH VOLTAGE: 480 -...
Square D 50 KVA Transformer
High voltage AMPS - 208/140 Low voltage AMPS - 417/208 KVA: 50 | KW: 50 | PHASE: 1/60 | LOW VOLTAGE: 120/240
Hammond 45 KVA Transformer
KVA: 45 | KW: 45 | PHASE: 3/60 | LOW VOLTAGE: 208 | HIGH VOLTAGE: 480Y/277V | AMPS: 54.1
Square D 30 KVA Transformer
KVA: 30 | KW: 30 | PHASE: 3/60 | LOW VOLTAGE: 208/120 | HIGH VOLTAGE: 480
Powertran 30 KVA Transformer
KVA: 30 | KW: 30 | PHASE: 3/60 | LOW VOLTAGE: 208Y/120 | HIGH VOLTAGE: 240
Acme 25 KVA General Purpose Transformer
KVA: AW-3 | KW: 25 | STEP: 25 | PHASE: 1/60 | CONNECTIONS: 240-480 | LOW VOLTAGE: 120-240
Hevi-Duty 15 KVA Transformer
KW: 15 | STEP: 15 | PHASE: 3/60 | CONNECTIONS: 480 Delta | LOW VOLTAGE: 208Y/120
Hammond 30 KVA Transformer
KVA: 30 | KW: 30 | PHASE: 3/60 | LOW VOLTAGE: 208Y/120V | HIGH VOLTAGE: 480
Square D 25 KVA Transformer
Low voltage AMPS - 208/104 High voltage AMPS - 104/52 KVA: 25 | KW: 25 | PHASE: 1/60 | LOW VOLTAGE: 120/240
Hammond 15KVA Transformer - Type K
KVA: 15 | KW: 15 | PHASE: 3/60 | LOW VOLTAGE: 240 | HIGH VOLTAGE: 480
Powertran 15 KVA G.P. Transformer
KVA: 15 | KW: 15 | PHASE: 1/60 | CONNECTIONS: 240-480 | LOW VOLTAGE: 120-240
Federal Pacific 15KVA Transformer
KVA: 15 | KW: 15 | PHASE: 3/60 | LOW VOLTAGE: 120/208 - 42 AMP | HIGH VOLTAGE: 480
Powertran 15 KVA Transformer
KVA: 15 | KW: 15 | PHASE: 3/60 | LOW VOLTAGE: 208Y/120 | HIGH VOLTAGE: 480
Jefferson 10 KVA GP Transformer
KVA: AW-3 | KW: 10 | STEP: 10 | PHASE: 1/60 | CONNECTIONS: 240-480 | LOW VOLTAGE: 120/240
Jefferson Electric 10 KVA GP Transformer
KVA: AW-3 | KW: 10 | STEP: 10 | PHASE: 1/60 | CONNECTIONS: 240-480 | LOW VOLTAGE: 120/240
GE 9KVA General Purpose Transformer
KVA: AW-3 | KW: 9 | STEP: 9 | PHASE: 3/60 | CONNECTIONS: 480 | LOW VOLTAGE: 240
GE 7.5 KVA General Purpose Transformer
KVA: AW-3 | KW: 7,5 | STEP: 7.5 | PHASE: 1/60 | CONNECTIONS: 240-480 | LOW VOLTAGE: 120/240
Acme 7.5 KVA General Purpose Transformer
KVA: AW-3 | KW: 7,5 | STEP: 7.5 | PHASE: 1/60 | CONNECTIONS: 240-480 | LOW VOLTAGE: 120-240 | AMPS: 1) Inv....
Trans Tech 9 KVA Transformer
Dry type transformer NEMA 1 Enclosure KVA: 9 | KW: 9 | PHASE: 3/60 | LOW VOLTAGE: 230 | HIGH VOLTAGE: 460
Hevi-Duty 6KVA G.P. Transformer
KVA: AW-3 | KW: 6 | STEP: 6 | PHASE: 3/60 | CONNECTIONS: 480 Delta | LOW VOLTAGE: 240D/120CT
Acme 7.5 KVA Transformer
KVA: 7.5 KVA | KW: 7,5 | PHASE: 1/60 | LOW VOLTAGE: 120/240 | HIGH VOLTAGE: 240/480
Acme 6 KVA General Purpose Transformer
KVA: AW-3-Floor | KW: 6 | STEP: 6 | PHASE: 3/60 | CONNECTIONS: 480 | LOW VOLTAGE: 240
GE 1KVA 1PH Transformer
240 in 120 out 480 in 240 out KVA: 1 | KW: 1 | PHASE: 1 | LOW VOLTAGE: 120/240 | HIGH VOLTAGE: 240/480
Temptek 45 Ton Tower Cell System w/Tower, pump tank station & water treatment system
TOWER - ON STAND: - Model RFPE-45/450 - 45 Ton Cooling Tower - 450 gallon PE Pump Tank Station - ...
IMS Hot Oil Temperature Controller
- Flow: 45 gpm @ 10' head (4.3 PSI) - Outlet: 1" NPT - Inlet: 1" NPT - Cooling: Oil to water head...
Shini STM-1215-HT Hot Oil Temperature Controller - NEW!!!
Flow: 15 GPM @ 30 PSI Main heating tank capacity: 1.8 gallons Sub heating tank capacity: 4.2 gall...
Shini STM-1220W Temp. Controller NEW
Delivery: 16-20 weeks ARO KW: 12 | No. of Zones: 1 | Media: Water | Pump HP: 2.5 | Voltage: 230/3/60 | Contr...
IMS Hydra Temperature Controller
KW: 9 | No. of Zones: 1 | Media: Water | Max. Temperature: 250 degrees F | Pump HP: 3/4 | Voltage: 230/3/60...
IMS Hydra Temperature Controller
KW: 9 | No. of Zones: 1 | Media: Water | Max. Temperature: 250 degrees F | Pump HP: 3/4 | Voltage: 460/3/60
Temptek VTR-2100LS Temperature Controller - NEW!!!
Delivery: 4-5 weeks ARO KW: 10 | No. of Zones: 1 | Media: Water | Max. Temperature: 250 degrees F | Pump HP:...
Mokon Temperature Controller
KW: 9 | No. of Zones: 1 | Media: Water | Max. Temperature: 250 degrees F | Pump HP: 3/4 | Voltage: 230/3/60
Shini STM-910M-OLT Hot Oil Temperature Controller - NEW!!!
Cooling method: Closed loop shell & tube Sight gauge Low level switch Mag drive pump Internal by-...
Temptek VTR-275LS Temperature Controller
Delivery: 4-5 weeks ARO KW: 10 | No. of Zones: 1 | Media: Water | Pump HP: 3/4 | Voltage: 440/3/60 | Control...
Shini STM-910-O-LT Hot Oil Temperature Controller
Flow: 15 FPM Main heating tank: 1.58 gallons Sub heating tank: .85 gallons Cooling method: Closed...
Shini STM-907-HT Hot Oil Temperature Controller
Flow: 10 GPM @ 30 PSI Main heating tank capacity: 1.58 gallons Sub heating tank capacity: 1.58 ga...
Mokon Temperature Controller
KW: 9 | No. of Zones: 1 | Media: Water | Max. Temperature: 250 degrees F | Pump HP: 3/4 | Voltage: 230/3/60
Cooling Technologies Temp. Controller
KW: 9 | No. of Zones: 1 | Media: Water | Pump HP: 1 | Voltage: 460/3/60
AEC SLC02 Autoloader
Throughput: 500 lbs/hr - Aluminum pick up wand - Brushed stainless steel construction - All stain...
Shini SAL-12U Loader NEW
Motor: 1.8 HP | Pounds: 880 | Conveying capacity: 880 lbs/hr | Hopper capacity: 15 lbs | Voltage: 110/1/60
Motan Vacuum Loader
Type 29006064 Capacity: Up to 200 lbs/hr Motor loader w/flap discharge Unique filter design & adj...
Shini VL-120 Compressed Air Venturi Loader - NEW!!!
- Level switch: Glass tube hopper with photo sensor - Conveying hose diameter: 1.25" ID - Stainle...
Shini SAL-1U Hopper Loader NEW!!!
Motor: 7/8 HP | Pounds: 66 | Conveying capacity: 66 lbs/hr | Hopper capacity: 1 lb. | Voltage: 110/1/60
Conair DL25 Receiver
Capacity: 85 liters Dimensions: 25" dia. x 33.75" H above plate 9.5" below plate Pounds: 25
Autoload AL1525 Loader
Consists of: - Hopper/filter assy. - Wand - Accelerataor - Control assy. - Sight glass/Sensor Ass...
Mould-Tek VIM-501 Vacuum Loader
- Throughputs: 300 lbs/hr - Pneumatic operated discharge valve Pounds per Hour: 300
Dri-Air Compressed Air Loader Box #13
- Single material hopper & filter (missing top) - Proximity switch - Sight glass - 3.5" x 3.5" Mo...
Dri-Air Compressed Air Loader Box #12
- 2) Dual material hoppers w/filter, 1 w/o filter - 1) Proximity switch - Sight glass - 3.5" x 3....
Dri-Air Compressed Air Loader Box #10
- Single material hopper & filter - Proximity switch - Sight Glass w/spare sight glass - 3.5" x 3...
Dri-Air Compressed Air Loader Box #9
- Single material hopper & filter - Proximity switch - Sight glass - 5.5" x 5.5" Mold machine ada...
Dri-Air Compressed Air Loader Box #7
- Single material hopper & filter - Proximity switch - Sight glass - 4" x 4" Hopper adapter cover...
Dri-Air Compressed Air Loader Box #8
- Single material hopper & filter - Proximity switch - Sight glass - 5.5" x 5.5" Mold machine ada...
Dri-Air Compressed Air Loader Box #6
- Single material hopper & filter - Proximity switch - Sight glass - 3.5" x 3.5" Mold machine ada...
Dri-Air Compressed Air Loader Box #5
- Single material hopper & filter - Proximity switch - Sight glass - 3.5" x 3.5" Mold machine ada...
Dri-Air Compressed Air Loader Box #3
- Single material hopper & filter - Proximity switch - Sight glass - 5.5" x 5.5" Mold machine ada...
Dri-Air Compressed Air Loader - Single Material Box #1
- Single material hopper & filter - Proximity switch - Sight glass - 3.5" x 3.5" Mold machine ada...
Dri-Air Compressed Air Loader Box #2
- Single material hopper & filter - Proximity switch - Sight glass - 5.5" x 5.5" Mold machine ada...
Unadyn Autoload Model SHGT Loader
Single material loader Load up to 1000 lbs/hr @ 100 PSI Pounds per Hour: 1000
2000 lb. Conair Insulated Hopper
Model 1805390800 Sight glass Door Dump tube Distribution box Overall Hopper 10'9", Hopper only 9' Dimensions...
Novatec 2500 lb. Insulated Hopper w/stnd
EQUIPPED WITH: - Door w/sight glass - Dump tube - Distribution box - Inlet/outlet: 8" - Stand 3'8" H Pounds:...
Unadyn 2000 lb. Ins. Hopper w/rec/stand
EQUIPPED WITH: - Whitlock SRH-16 Receiver S/N 30D0268 Inlet/Outlet: 2" - Distribution box - Door ...
Nucon/Wittmann 2500 lb. Ins. Hopper
- Dump tube w/shutoff - Shutoff (on bottom) - Sight glass - Door - Distribution box - single tube...
Conair CH24-18 Insulated Hopper on stand
Capacity: 630 lbs. Mounted on stand Pounds: 630 | Sight glass: Yes | Dump tube: Yes | Door: Yes | Shut off: Yes
Thoreson McCosh 360 lb. Insulated Drying Hopper on stand
- Sight glass - Dump tube - Magnet drawer - Shut-off - On stand - Loader Pounds: 360
500 lb. Conair Insulated Hopper on cart
Mounted on cart with casters Dimensions: 33" dia. x 63" H | Pounds: 500 | Sight glass: Yes | Dump tube: Yes
250 lb. Non-Insulated Hopper on stand
On 34" High stand w/casters Distribution box Magnet drawer Dimensions: 24" x 60" | Pounds: 250 | Sight glass...
200 lb. Non-Insulated Hopper (tan)
Dimensions: 22" dia. x 44" H | Pounds: 200 | Hole diameter: 4" | Base plate: 8" x 8" | Sight glass: Yes
Whitlock 150 lb. Insulated Hopper
2" Inlet 2" Outlet Dimensions: 26" dia. x 39" H | Pounds: 150 | Hole diameter: 3-1/2" | Base plate: 9" x 9"
200 lb. Nucon Non-Insulated Hopper
Capacity: Approx. 200 lbs. Shut off Sight glass Dump tube Dimensions: 34" dia. x 30" OAH Pounds: 200
Whitlock 150 lb. Insulated Hopper
2" Inlet 2" Outlet Dimensions: 26" dia. x 39" H | Pounds: 150 | Hole diameter: 3-1/2" | Base plate: 9" x 9"
150 lbs. Nucon Non-Insulated Hopper
Capacity: Approx. 150 lbs. Dump tube Nucon Dual Ratio Pneumatic Loader Pounds: 150
150 lb. Non-Insulated Hopper
Can be used as a drying hopper but it is not insulted. Dimensions: 23" dia. x 43" H | Pounds: 150 | Base pla...
150 lb. Conair Non-Insulated Hopper
Model 18207804 Base plate: Needs base plate | Pounds: 150 | Sight glass: Yes | Dump tube: Yes | Door: Yes
Conair 150 lb Insulated Hopper
Dimensions: 24" dia. x 46-1/2" | Pounds: 150 | Sight glass: Yes | Dump tube: Yes | Door: Yes
Whitlock 150 lb. Ins. Hopper on cart
Mounted on cart Dimensions: 22" dia. x 42" H | Pounds: 150 | Sight glass: Yes | Dump tube: Yes | Door: Yes
Whitlock 100 lb. Ins. Hopper w/loader
Whitlock SRL-02 Vacuum Loader - S/N 99K0928 1.5 HP 110 volt Hopper capacity: .2 cu. ft./7 lbs. Th...
Whitlock 150 lb. Ins. Hopper on cart
Mounted on cart Dimensions: 22" dia. x 42" | Pounds: 150 | Sight glass: Yes | Dump tube: Yes | Door: Yes
150 lb. Non-Insulated Drying Hopper
Dimensions: 24" dia. x 44" H | Pounds: 150 | Dump tube: Yes | Door: Yes
150 lb. Conair Non-Insulated Hopper
Dimensions: 18" dia. x 38-1/2" H | Pounds: 150 | Base plate: 9" x 9" | Sight glass: Yes | Dump tube: No
3) Thoreson McCosh 100 lb. Non-Insulated Hoppers on stand
- No lids on hoppers Pounds: 100 | Sight glass: Yes | Door: Yes | Shut off: Yes
100 lb. Novatec Insulated Hopper
w/Novatec VL-2 Proportional Loader S/N VL2-0218 120/1/60 w/Bunting Magnetics Magnet Drawer w/shut...
100 lb. Plasti-Quip Surge Bin
Dimensions: 24" x 24" x 28-1/2" (55-1/2" OAH) Lid Sight glass Collector box Mounted in casters Pounds: 100
100 lb. Conair Non-Insulated Hopper
Model 18207802 Dimensions: 22" dia. x 42" high No mounting plate Door Sight glass Dump tube Screen Pounds: 100
100 lb. Non-Insulated Hopper
Dimensions: 20" dia. x 33" H | Pounds: 100 | Sight glass: No | Dump tube: No | Door: No | Shut off: Yes
100 lb. Conair Non-Insulated Hopper
Model 18207801 Dimensions: 22" dia. x 41" high Bottom hole diameter: 2-1/2" Door Sight glass Dump...
100 lb. Machine Hopper
Dimensions: 26-3/4" x 33" H | Pounds: 100 | Hole diameter: 3-1/2" | Base plate: 6-1/2" x 6-1/2" | Sight gla...
Conair 100 lb. Insulated Hopper
Dimensions: 24" dia. x 41" L | Pounds: 100 | Base plate: No base | Sight glass: Yes | Dump tube: Yes | Door...
Conair 100 lb. Insulated Hopper
24"Diameter 42"Long Pounds: 100 | Sight glass: Yes | Dump tube: Yes | Door: Yes
75 lb. Non-Insulated Hopper w/receiver
w/lid and Novatec Receiver Dimensions: 25" dia. x 26" H | Pounds: 75 | Hole diameter: 2-1/2" | Base plate: Yes
IMS Portable Resin Bin
- Polyethylene construction - 2.3 cu ft / 75 lb capacity - Side vacuum tube - Slide plate - On ca...
2) 75 lb. Hoppers on stand
Non-Insulated Door Shut Off No lids Dimensions: 19" dia. x 32" OAH | Pounds: 75 | Sight glass: Yes | Dump tu...
50 lb. Non-Insulated Hopper w/lid
Dimensions: 21" dia. x 22" H | Pounds: 50 | Hole diameter: 2" | Base plate: 6" x 6" | Sight glass: Yes
Whitlock 50 lb. Hopper w/feeder
w/Whitlock Additive Feeder - Model AF-1 - S/N 34J1123 - 115 volt w/Receiver Pounds: 50
Conair 35 lb. Insulated Drying Hopper
Dimensions: 10" x 16" x 36" H | Pounds: 35 | Base plate: 4-3/4" x 4-3/4"
50 lb. Non-Insulated Hopper
Dimensions: 16" dia. x 18" H | Pounds: 50 | Hole diameter: 2" | Base plate: 5" x 5" | Sight glass: Yes
30 lb. Newbury Hopper
Dimensions: 17" dia. x 14" H | Pounds: 30 | Hole diameter: 1-3/4" x 1" (oval) | Dump tube: dump hole | Shut...
50 lb. Conair Insulated Hopper
Model D546701 Dump tube Door Sight glass Dimensions: 24" x 26" | Pounds: 50
Conair 50 lb. Non-Insulated Hopper
Dimensions: 22" dia. x 33" H | Pounds: 50 | Sight glass: Yes | Dump tube: Yes | Door: Yes
Thoreson McCosh 48 lb. Ins. Hopper
Distribution box Stand Pounds: 48 | Sight glass: Yes | Dump tube: Yes | Door: Yes
25 lb. Stainless Steel Hopper
Dimensions: 20" dia. x 19" H | Pounds: 25 | Hole diameter: 2" | Base plate: No plate | Sight glass: Yes
30 lb. Machine Hopper
Dimensions: 21" dia. x 23-1/2" H | Pounds: 30 | Hole diameter: 2-1/2" | Base plate: 7" x 7"
25 lb. Stainless Steel Hopper
w/lid Dimensions: 20" dia. x 19" H | Pounds: 25 | Hole diameter: 2" | Base plate: No plate | Sight glass: Yes
30 lb. Non-Insulated Square Hopper
Dimensions: 12" x 12" x 21" H | Pounds: 30 | Sight glass: No | Dump tube: No | Door: No | Shut off: Yes
20 lb. Stainless Steel Hopper
Dimensions: 16" dia. x 15" H | Pounds: 20 | Hole diameter: 2" | Base plate: No plate | Sight glass: Yes
30 lb. Square Non-Insulated Hopper
Dimensions: Top - 14" x 12" tapered down to 5" x 5" bottom x 16" OAH Sight glass Bottom opening: ...
AEC/Whitlock 600 lb. Hopper w/Vac Recvr.
AEC/Whitlock SRC16 Vacuum Receiver S/N - Receiver capacity: 50 lbs. - Inlet/Outlet: 3" AEC/Whitlo...
200 lb. Hopper on stand
Take-Off Stand: 56" x 56" x 45" H Dimensions: 29" dia. x 36" H | Pounds: 200 | Sight glass: Yes
240# Hopper W/Stand (Non-Insulated)
Dimensions: 70" H x 17-3/4" ID Capacity: 240 lbs. approx. Shut off Dump tube Cone Sight glass Screen Pounds:...
240# Hopper W/Stand (Non-Insulated)
Dimensions: 70" H x 17-3/4" ID Capacity: 240 lbs. approx. Shut off Dump tube Sight glass Cone No ...
2) 100 lb Non-Insulated Hoppers on stand
Dimensions: 20" dia. x 36" H Capacity: Approx. 100 lbs. each Slide shut off Sight glass Lids Pounds: 100
Granutec 16" x 16" Granulator 40 HP
- 3 Knife, open rotor - 2 Bed knives - Tangential feed - Slant cut - 4" Air-Veyor discharge Machi...
Foremost AHD-6 Granulator
- Top feed - Foremost 2 HP Blower Opening: 18" x 15" | Pounds per Hour: 1815 | Screen Hole Size: 3/8" | Volt...
Genox GC600T Granulator 30 HP NEW!!!
- Chamber opening: 12.5" x 23.5" - Rotor size: 12.50" dia. x 23.5" L - Rotor speed: 580 RPM - Rot...
Genox GC800T Granulator 60 HP NEW!!!
- Chamber opening: 16.5" x 31.5" - Rotor size: 16.5" dia. x 31.5" L - Rotor speed: 580 RPM - Roto...
Shini (IMS) SG2042 Granulator
- Solid rotor - Chamber size: 7.9" x 16.5" - Bed knives: 2 - Fly knives: 18 - staggered blades - ...
Econogrind ESL180/430 Granulator 5.5 HP
- Bed knives: 2 - Fly knives: 45 Photos available. Opening: 16.9" x 11.4" | Pounds per Hour: 1611 | Screen H...
Ball & Jewell BP22FX Granulator 7.5 HP
Open rotor 2 Bed knives 3 Fly knives Top feed Currently wired for 460 volt Opening: 16.5" x 16.5" | Pounds p...
Rapid 35 Series Granulator 10 HP
Open rotor 2 Bed knives 3 fly knives Opening: 12" x 18" | Pounds per Hour: 1218 | Screen Hole Size: 5/16"
Shini SG3675P Granulator - NEW!!!
- Blower: 3 HP - Fly knife style: Scissor - Bed knives: 4 - Fly knives: 6 - Open rotor - Rotor sp...
Nelmor 12" x 15" Granulator 15 HP
Closed rotor 2 Bed knives 3 Fly knives 1760 RPM AMPS 37.4/18.7 Opening: 12" x 15" | Pounds per Hour: 1215
Rapid 810 Granulator 5 HP
- Staggered blades - Replaceable tips - 3 sets x 2 - Opening: 8" x 10" | Pounds per Hour: 810 | Screen Hole ...
Battenfeld-Gloucester Granulator
2-Blade closed rotor Bed knives: 1 AMPS 13.6/6.8 1740 RPM Opening: 12-1/2" x 4-1/2" | Pounds per Hour: 1204
Polymer 912SPL Granulator
- Open rotor - 1 Bed knife - 2 Fly knives - Top feed Opening: 9" x 12" | Pounds per Hour: 912 | Screen Hole ...
Wortex Jc-3 Granulator 3 Hp
FEED TRAY HEIGHT: 41" NO. OF ROTATING KNIVES: 15 ( 3 X 5) DIA. OF CUTTING CIRCLE: 6.37" STATIONAR...
Auto Grind Granulator
- Hopper opening: 21" x 16" - Infeed opening: 8" x 16" - 1160 RPM - 230-460/3/60 - currently wire...
Conair Wortex JC-5L Granulator 5 HP
Blades good Wt: 1000 lbs. Opening: 8" x 14" | Pounds per Hour: 814 | Screen Hole Size: 1/4" | Motor HP: 5 HP
Ball & Jewell MVP810 Granulator
- Top feed Opening: 8" x 10" | Pounds per Hour: 810 | Motor HP: 5 HP, 1165 RPM | Voltage: 230-460/3/60
Ball & Jewell MVP810 Granulator
- Top feed with homemade plexiglas chute Opening: 8" x 10" | Pounds per Hour: 810 | Motor HP: 5 HP, 1165 RPM
Nelmor G810M1 Granulator
- Top feed Opening: 8" x 10" | Pounds per Hour: 6,516 | Motor HP: 5 HP, 1725 RPM
Nelmor G810P1 Granulator 5 HP
Closed rotor 2 Bed knives 3 Fly knives Currently wired for 460 volt Opening: 8" x 10" | Pounds per Hour: 6516
Cumberland Model 6516 Granulator
- Top feed Opening: 6.5" x 16" | Pounds per Hour: 609 | Motor HP: 5 HP, 1750 RPM | Voltage: 230/3/60
Conair CR-69 Granulator
Opening: 6" x 9" (cutting chamber) | Pounds per Hour: 609 | Voltage: 460/3/60 - 5.1 FLA | Throughput: Up to...
Thoreson McCosh TD360 Drying System
- Thoreson McCosh 1000 lb hopper on stand - Thoreson McCosh Receiver - Thoreson McCosh VM Control...
Shini SDD1200U/700H-D Dryer & Hopper NEW
- 1200U Hopper capacity: 1,777 lbs. virgin ABS - Built-in Dew Point Monitor Delivery: 20-24 weeks...
Shini SD-1000H Dryer & Hopper - NEW!!!
- DH1500U Hopper capacity: 2204 lbs. virgin ABS Delivery: 20-24 weeks ARO Capacity: 675 lbs/hr | Pounds per ...
PPE 300 lb/hr Dehumidifying Hopper Dryer
- Condensate drain: 12" from floor with 9" long 1/4" drain hose - Standard 2" hose outlet connect...
Una-Dyn DHD-6 Dryer w/800 lb Hopper
Capacity: 250 lbs/hr Temperature range: 250 degrees F Dewpoint: 40 degrees Controller: FN Micropr...
Shini SD700H-PHC-D Dryer NEW!!!
Model SD700H-PHC-D - Blower CFM: 450 - Pipe diameter: 4" - 460 volt - Process heater - Dew point ...
Shini SDD450U/200H Dryer & Hopper w/cart - NEW!!!
- Shini 668 lb. Insulated Drying Hopper - Mounted on cart OPTIONAL: - Material suction box - Sing...
Shini SD400-H-PHC-D Dryer NEW!!!
Model SD400H-PHC-D - Blower CFM: 260 - Pipe diameter: 3" - 460/3/60 - Process heater - Dewpoint m...
Shini SDD600/400HD Dryer/hopper on cart
- Molecular sieve, dessicant honeycomb rotor guarantees precise dehumidification - P.I.D. Tempera...
Motan Luxor Flex Side Dryer w/2 hoppers on cart
- 2) 75 lb Hoppers Mounted on cart Capacity: 50 lbs/hr | Pounds per Hour: 50 | Process H.P./KW: 1.5 kw
Conair W100 Dryer
DC-1 CONTROL: - 6 Character, 7 segment, LED display for high visibility or setpoint and actual op...
Whitlock WD100 Dryer w/300 lb Ins Hopper
Whitlock 300 lb. Ins. Hopper Model DH2 OMI-HE-Q S/N 93B0345 - Door - Sight glass - Dump tube - Ta...
Shini SD200H-PHC-D Dryer NEW!!!
Model DS200H-PHC-D - Blower CFM: 125 - Pipe diameter: 2.5" - 460/3/60 - Dew Point Meter - Process...
Shini SDD300U/200HD Dryer/Hopper on cart
- Molecular sieve, desiccant honeycomb rotor guarantees precise dehumidification - P.I.D. Tempera...
Shini SD120H-PHC-D Dryer NEW!!!
Model SD120H-PHC-D (Dewpoint Process Heater) - Blower (CFM): 75 - Pipe diameter: 2" - 460/3/60 FE...
Shini SEHD-100 Hot Air Dryer - NEW!!!
Heater: 6 kw Blower: 0.3 HP Hopper capacity: 3.53 cu ft/123.5 lbs EQUIPPED WITH: - Floor Stand - ...
Shini SDD230U/120HD Dryer/Hopper on cart - NEW!!!
- Molecular sieve, desiccant honeycomb rotor guarantees precise dehumidification - P.I.D. Tempera...
Matsui MJ3-75U Dryer w/hopper & loader on cart
Hopper: 165 lbs. Loader: Matsui programmable loader Aftercooler flow: 1.6 GPM Compressed air: 70 ...
Shini SDD-160U/80H-D Dryer, hopper, cart - New!!!
Capacity: 50 lbs/hr approx. | Pounds per Hour: 50 | Process H.P./KW: 3/4 HP | Regeneration H.P./KW: .4/3
Shini SDD-40U/40H Drying System - NEW!!!
EQUIPPED WITH: - Shini 58 lb. Insulated Hopper - Built-In Dew Point Monitor - PID Microprocessor ...
Shini SD-40H-PHC-D Dryer - NEW!!!
- Silica-gel honeycomb rotor which allows dehumidifying, regenerating and cooling cycles simultan...
Shini SEHD-200 Hot Air Hopper Dryer - NEW!!!
- Hopper capacity: 247 lbs. - P.I.D. Microprocessor Control features accurate temperature control...
Shini SEHD-150 Hot Air Hopper Dryer
- Hopper capaity: 185 lbs. - P.I.D. Microprocessor Control features accurate temperature control,...
24" x 20' Conveyor
- Belt size: 24" W x 20' Long - Flat belt - Variable speed controller Tonnage: 24240
TEC 18" x 25' Conveyor
Model 18 25 - 18" Wide smooth belt - 25' Long - Adjustable legs - 1/3 HP - 115/1/60 - 10A - SMV F...
TEC Horizontal Conveyor
Model H 18 18-6 - 18" Wide smooth belt - 18' Long - 1/3 HP - 115/1/60 - 10A - Adjustable legs EQU...
PPE 24" x 5' Conveyor
- Belt size: 24" W x 5' L - Speed: 18.3 FPM - Height to top of belt: 29" min/41" max - OAL: 64" -...
Dry Coolers 30 Ton WC Chiller w/Conair PT1400 Pump Tank
CHILLER & PUMP TANK CAN BE SOLD SEPARATELY - CALL FOR PRICING DRY COOLERS 30 TON WC CHILLER: - 29...
Advantage Dual Zone 15 Ton Titan Chiller w/450 gal. poly tank & lid
Model TT!-15 - Process pump: Scot #16 - 3 HP - Evaporator pump: Scot #16 - 2 HP - 2" Process disc...
Conair 3 Ton AC Chiller
20-65 degrees F setpoint 1 HP Pump 11 Gallon reservoir Auto water make-up 460/3/60 Tonnage: 3
Temptek 15 Ton AC Chiller - NEW
Refridgerant: R410A Digital scroll compressor Automatic low flow bypass valve 65 gal. insulated n...
Temptek 10 Ton W Chiller - NEW!!!
- R410A Refridgerant - Digital scroll compressor - Discharge pressure gauge - Automatic low flow ...
Shini 10 Ton AC Chiller - NEW!!
- Compressor: 10 HP - Cooling capacity control: 50% - 100% - Water tank capacity: 22 gal. INCLUDE...
Shini 5 Ton AC Chiller - NEW
CONDENSER: - 1) Fan - 1 HP COMPRESSOR: - 5 HP - Cooling capacity control: 50-100% - Reservoir cap...
5 Ton Thermalcare Accuchiller - WC
- Compressor: 5 HP - Process pump: 1.5 HP - 16 lbs R-22 Refridgerant - Temperature range: 30 degr...
Temptek 5 Ton WC Chiller NEW
- Digital Scroll Compressor - Refridgerant: R410A - Temptek Microprocessor Control - Tank capacit...
Shini 3 Ton AC Chiller - NEW
- Compressor: Scroll - Refridgerant: R410A - Control mode: Thermostatic expansion valve - Evapora...
Temptek 3 Ton WC Chiller NEW
- Compressor: 3 HP - Compressor type: Hermetic scroll - Tank capacity: 7-1/2 gal. OPTIONS: - Proc...
Temptek 3 Ton AC Chiller NEW
- R410A Refrigerant - Scroll compressor - Tank capacity: 7-1/2 gal. - Temptek Microprocessor cont...
Temptek 2 Ton AC Chiller
- Compressor: 2 HP, scroll type - Condenser: Air cooled by fan - 2000 CFM - (3) Ambient: 95 degre...
AEC 1.5 Ton AC Chiller
Cooling capacity: 1.5 Ton Air cooled Electrics: 480 volt - 8.11 FLA Compressor: 1.5 HP Pump. .5 H...
Rotron 10 HP Blower
Frame 215TC2 141 Suction Horsepower: 10 | HP: 10 | Voltage: 200-230-460/3/60 | AMPS: 28/23/12.5
Conair WSB-100 4 Component Blender
Motor: Bison 1/15 HP Electrics: 115 volt Controls: Maguire INCLUDES: - Conair DL-12 & DL-15 Recei...
Acme 5 KVA General Purpose Transformer
Style SR KVA: 5 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
RAE 63VA Control Transformer
KVA: 63 VA | Phase: 2/50-60 | Primary voltage: 220-380 | Secondary voltage: 24
Hevi-Duty 5 KVA G.P. Transformer
KVA: 5 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
GE 5 KVA General Purpose Transformer
KVA: 5 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Hevi-Duty 5 KVA G.P. Transformer
KVA: 5 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Acme 5 KVA General Purpose Transformer
KVA: 5 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Square D 3 KVA Gen. Purpose Transformer
2 Available KVA: 3 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Federal Pacific 3 KVA GP Transformer
KVA: 3 | Phase: 1/60 | Primary voltage: 208 | Secondary voltage: 120Y-240
Dongan 3 KVA Control Transformer
KVA: 3 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 110-120
Acme 3 KVA General Purpose Transformer
KVA: 3 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
3) Dongan 3KVA G.P. Transformers
3 Transformers wired together KVA: 3 | Phase: 1/60 | Primary voltage: 120-240 | Secondary voltage: 12-24
GE 3 KVA General Purpose Transformer
KVA: 3 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Hevi-Duty 2 KVA Control Transformer
KVA: 2 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 110-120
Federal Pacific 3 KVA G.P. Transformer
KVA: 3 | Phase: 1/60 | Primary voltage: 208 | Secondary voltage: 120-240
GE 2 KVA Gen. Purpose Transformer
2 Available KVA: 2 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Square D 3 KLVA Single Phase Transformer
Cat. #3S1F KVA: 3 | Phase: 1 | Primary voltage: 480-240 | Secondary voltage: 240-120
Westinghouse 2 KVA GP Transformer
KVA: 2 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Square D 2 KVA Gen. Purpose Transformer
KVA: 2 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Square D 2 KVA Gen. Purpose Transformer
KVA: 2 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Powertran 2KVA Gen. Purpose Transformer
20 AMP Circuit Breaker KVA: 2 | Phase: 1/60 | Primary voltage: 240-480 fused | Secondary voltage: 120 thru d...
Acme 2KVA General Purpose Transformer
KVA: 2 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Dongan 1.5 KVA Control Transformer
1 Available KVA: 1.5 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120
Acme 2 KVA General Purpose Transformer
KVA: 2 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Square D 2 KVA Gen. Purpose Transformer
KVA: 2 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Westinghouse 1.5 KVA Control Transformer
KVA: 1.5 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 110-120
Square D 1.5 KVA G.P. Transformer
KVA: 1.5 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 120-240
Square D 50VA Control Transformer
8 Available KVA: 50 VA | Primary voltage: 240/480 | Secondary voltage: 120
Foster 1.5 KVA Control Transformer
KVA: 1.5 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 110-120
Square D 3 KVA Gen. Purpose Transformer
KVA: 3 | Phase: 1/60 | Primary voltage: 480/240 | Secondary voltage: 240/120
Hevi-Duty 3 KVA Transformer
2 Available KVA: 3 | Phase: 1/60 | Primary voltage: 240/480 | Secondary voltage: 120/240
.250 KVA Transformer
1 Available KVA: .250 | Phase: 1 | Primary voltage: 230-460 | Secondary voltage: 120-240
Hevi-Duty 2 KVA Transformer
10 Available KVA: 2 | Phase: 1/60 | Primary voltage: 240/480 | Secondary voltage: 120/240
Acme .1 KVA Control Transformer
12 Available KVA: .1 | Phase: 1/60 | Primary voltage: 240-480 | Secondary voltage: 110-120
Acme 1 KVA Transformer
Style SR KVA: 1 | Phase: 1/60 | Primary voltage: 120/240 | Secondary voltage: 16x32
Square D 1 KVA Transformer
KVA: 1 | Phase: 1/60 | Primary voltage: 240/480 | Secondary voltage: 120/240
Cutler Hammer 0.06 KVA Control Transfrmr
Series A1 KVA: 0.06 | Primary voltage: 240/480 | Secondary voltage: 120
Cutler Hammer 0.05 KVA Control Transfrmr
Series A1 KVA: 0.05 | Primary voltage: 240/480 | Secondary voltage: 120
Micron Voltage Transformer NEW
Model Impervitran Power: 100 VA Primary voltage: 240/480 v-ac | Secondary voltage: 110/120 v-ac
MICRON IMPERVITRAN CONTROL TRANSFORMER
CAT# B100BTZ13 KVA: 0.1 | Primary voltage: 230/460 | Secondary voltage: 120
STACO VARIABLE TRANSFORMER
PART #201 2 AMPS INPUT: 120 V OUTPUT: 1-120/132 V KVA: 0.26 | Phase: SINGE
GE 1KVA Control Transformer 1PH
Model: 9T58B52 KVA: 1 | Phase: 1 | Primary voltage: 480/240 VAC | Secondary voltage: 120VAC
